Platform

Airframe & companion computer

Keep the aircraft under 25 kg — above that is Transport Canada’s medium-drone class and a different regulatory project. Software gaps are closed; remaining work is blocked on hardware that does not exist yet.

Airframe isometric

Three views of the airframe

Product-page angles for layout review — payload bay, clearances, and gear height.

Isometric

Isometric

Overall layout: payload bay, landing gear, companion mount.

Top

Top

Plan view for bay and antenna / radio clearances.

Side

Side

Belly camera height and gear clearance for rough fields.

Stack

RoleHardwareOwns
FlightPixhawk / CubeAttitude, nav, failsafes — survives Pi death
CompanionPi 5 8 GB + AI HAT+ 26 TOPSCapture, QA, inference, indices, spool (read-only MAVLink)
CameraCamera Module 3 (IMX708)Default sensor for georeference model; verify channel order
PositioningRTK GNSS (+ NTRIP)Corrections → receiver serial, not FC MAVLink

Staged spend (approx. CAD)

  1. Stage 0FreeWSL2, Docker, GPU power mode — unblocks SITL, Hailo compile, WebODM, farmOS
  2. Stage 1~C$400Pi 5, cooler, PSU, SD, Camera Module 3, reflectance panel — local imagery without an aircraft
  3. Stage 2~C$150AI HAT+ 26 TOPS — tiled weed survey becomes flyable (~288 ms vs seconds on CPU)
  4. Stage 3C$1,200–2,500Airframe, FC, batteries, RC, telemetry, rangefinder for AGL
  5. Stage 4–5C$750–1,950RTK / NTRIP, anemometer on a field-edge mast (not airframe downwash)

Livestock demo first if budget is tight: aerial_sheep_yolox_s (AP@.50 0.905) runs on a bare Pi. See pipeline proof.